Key Features
* Meets CCIR 580 and INTELSAT Requirements
* CP/LP switchable feed
* High RF performance
* Galvanized steel hardware
* Step-track control system
* Different frequency ranges from many feed configurations
* Antenna reflector be pre-assembly in works, special designed taper-pin easy installation and ensure on site assembly accuracy
Antenna Accessories
* Motorization Kits
* Limit Switches
* ODU Support Kits
* Factory Feed System Testing and Documentation
* Ocean Transport Packing
* Foundation Kit
* Lightening Rod Kit
* Grounding Kit Cable-Mounting Kit
* Anti-icing and Deicing
Options
* L,S,X bands and multi-bands
* 800MHz band with is available
* Feed blower or deicing with automatic controls
* Two or four Tx/Rx port in linear or circular polarized feeds
ELECTRICAL SPECIFICATION
Operating Frequency, GHz | C-Band | Ku-Band |
Receive | Transmit | Receive | Transmit |
3.4～4.2 | 5.85～6.65 | 10.95～12.75 | 13.75～14.5 |
Gain, Mid-Band. dBi | 56.37+20lg [f/6(GHz)] 52.98+20lg [f/4(GHz)] | 62.25+20lg [f/11.8(GHz)] 63.38+20lg [f/14(GHz)] |
Polarization | Liner/Circular |
XPD(on Axis),dB | 35 | 35 | 35 | 35 |
XPD across 1dB Beam Width,dB | 30 | 30 | 30 | 30 |
Axial Ratio(dB) for Circular Pol | 0.5 | 0.5 | 0.5 | 0.5 |
VSWR | Liner Pol | 1.3 | 1.3 | 1.3 | 1.3 |
Circular Pol | 1.25 | 1.25 | 1.25 | 1.25 |
Antenna Noise Temperature 5° Elevation 10° Elevation 20° Elevation 40° Elevation | 2 port feed 54°K 46°K 36°K 30°K |
| 2 port feed 65°K 58°K 50°K 42°K |
|
-3dB Beam Width, Mid-band | 0.368° | 0.25° | 0.127° | 0.11° |
Tx Power, KW |
| 5 |
| 2 |
Feed Interface | CPR-229F | CPR-137F | WR-75 | WR-75 |
Feed Insertion Loss,dB | 0.25 | 0.2 | 0.25 | 0.25 |
Isolation, Tx to Rx(Tx Freq) | 85dB |
Radiation Pattern:First Sidelobe | ≤-14, Meet ITU-RS.580-5 specifications |
MECHANICAL SPECIFICATION
Antenna Diameter | 13M |
Antenna Type | Cassegrain |
Antenna Pedestal Options | Kingpost Pedestal/Rotation Pedestal |
Azimuth Travel Range | ±85°/0°~360° |
Travel Rate for Az/El | 0.001°/s~0.3°/s |
Elevation Travel | 0°~90°(continuous) |
Backup Structure | Steel |
Pedestal Structure | Steel |
Finishes Reflector Surface Pedestal & Back Structure | High-diffusing white paint for aluminum panels Hot-dip Galvanized steel |
Surface Accuracy (RMS) | ≤ 0.5mm |
ENVIRONMENTAL SPECIFICATION
Operational Wind | 72km/h Gusting to 100km/h |
Survival Wind | 200km/h |
Temperature | -40°C ～ + 60°C |
Rain(Operational and Survival) | 10cm/h |
Relative Humidity | Up to 0% to 100% without condensation |
Ice(Survival) | 2.5cm radial |
Shock and Vibration | As encountered during shipment by commercial air,sea or truck |
Corrosive Atmosphere | As encountered in coastal regions and/or heavily industrialized areas |
Seismic (Survival) | 0.3G’s horizontal |
0.15G’s vertical |
GS13.0M ESA spec.pdf
